fade time

From Wiktionary, the free dictionary
Jump to navigation Jump to search

English[edit]

Noun[edit]

fade time (countable and uncountable, plural fade times)

  1. (film, television) The amount of time for a scene to fade to dark after lighting up.
  2. (signal processing) The time during which a wireless signal is too faint to be accurately received.
    • 2006, Roger L. Freeman, Radio System Design for Telecommunications, page 31:
      The annual fade time is three times that occurring in a heavy fading month when the climate is average.
    • 2014, Arun K. Majumdar, Advanced Free Space Optics (FSO): A Systems Approach:
      The fractional fade time (also called the probability of fade) describes the percentage of time the irradiance of the received wave is below some given threshold value.
    • 2016, Murat Uysal, ‎Carlo Capsoni, ‎Zabih Ghassemlooy, Optical Wireless Communications: An Emerging Technology, page 95:
      The mean fade time decreases with increasing elevation and fade threshold.
    • 2021, Douglas H Morais, 5G and Beyond Wireless Transport Technologies, page 62:
      Figure 4.12 of [8] shows that on the same path from which the data in Fig. 4.11 of [8] was derived, for fade depth deeper than about 20 dB, the fade time decreases by a factor of about 10 for a 10 dB increase in fade depth.
  3. (light engineering, sound engineering) The amount of time for light or sound from a specified source to fade in from nothingness to the maximum that one is using, or to fade out from the maximum to nothingness.
    • 2015, Michelle M. Fernandez, Corona SDK Mobile Game Development, page 183:
      Omitting this parameter invokes a default fade time, which is 1,000 milliseconds.
    • 2019, J. Michael Gillette, ‎Michael McNamara, Designing with Light: An Introduction to Stage Lighting:
      The time is used to assign a fade time to a cue.
    • 2021, Brad Schiller, The Automated Lighting Programmer's Handbook:
      If the fade time is set to ten seconds, then they will fade up their intensity over a ten second crossfade. Changing the fade time of the cue will adjust the fade time for all parameters stored within that cue.